Micro Innovations Digital Camera IC435C User Manual

Model IC435C  
Webcam  
User’s Manual  
Before installing device it is recommended that your operating system contain the most  
recent updates and service packs available.  
Install the software first before connecting the webcam to your PC. You will be prompted to  
restart your PC during this installation. Close and save all work before installing this device.  
 
Table of Contents  
Welcome…………………………………..…………………………………………………………………………..….….  
Installation Procedures…...………………….………………………………………………..………...…………………  
Using Your Webcam…………………………………………...…………………………………………….……………..  
Using Your Arcsoft® PhotoImpression……………………………………………………………………………….......  
Capturing Images from “Live” Video…………………………………….………………………………………………...  
Page 4  
Page 5  
Page 6  
Page 7  
Page 8  
Using Arcsoft® VideoImpression …………………..……………………………………………………………………..  
Troubleshooting ……………………………………………………………..……………………………………….……..  
Page 9  
Page 10  
Helpful Hints and Technical Support……………………………………………………………...…..…………………..  
Page 11  
3
 
Welcome  
Congratulations on the purchase of your new Webcam.  
The Webcam is compatible with IBM® or compatible PCs with an available USB port. It is supported by Windows®  
98SE, Me, 2000, XP, Vista™.  
Snapshot  
Button  
Feature Benefits:  
Includes Arcsoft® Photo & Video Editing Software  
Snap Shot Button  
Focus Ring  
Package Contents  
Webcam (USB)  
Active LED  
Indicator  
Installation & Arcsoft® Software CD  
Quick Installation Guide  
User’s Manual  
Warranty Information  
Adjustable  
Swivel Base  
4
 
Installation Procedures  
During the software installation, you must install the DRIVER. You can install the Arcsoft® PhotoImpression and  
VideoImpression software at a later time. Frequently check for updated webcam software by visiting our website,  
Turn on your computer.  
Insert the CD into your PC and  
follow the on-screen instructions.  
Connect the webcam into an available  
USB port. Follow all on-screen  
Note: In order for you to use your  
webcam you must install the  
software before plugging the  
webcam into your PC.  
instructions to install your new hardware.  
Note: You must choose the Driver  
Only installation in order for your  
webcam to function properly. You  
will be prompted to restart your PC.  
Your new webcam is now ready for use.  
5
 
Using Your Webcam  
To use the camera, click StartÆ ProgramsÆ Micro InnovationsÆ Webcam. Make sure that “Webcam” is checked under the  
Devices menu and that “Preview” is checked under the Options menu. At this point, you should see “Live” video capture in the  
window. If you do not please reference the Troubleshooting section in this manual.  
To Capture “Live” Video Clips (.avi)  
1. Click “Capture” and choose “Start Capture”  
2. Click “OK” from the “Ready to Capture” window. You will notice the elapsed time of video capture will be displayed in the  
lower left hand corner of the video capture window.  
3. To stop capturing video click “Capture” again and choose “Stop Capture”. To save the video clip click “File” and select  
“Save Capture video as”. Select the location of where the file is to be saved and name the file. Click “ok” to finish.  
Video Capture Settings  
To adjust video capture properties click “Options”, choose “Video Capture Filter” and select the “Video Proc Amp” tab. Here you  
can modify properties and setting such as Brightness, Contrast, Saturation and sharpness. Note: By clicking “Default” you can  
return to the original settings.  
Clicking “Options” and choosing “Video Capture Pin” can modify additional video capture settings. From this window, you can  
modify Frame Rate, Compression, Output Size and Quality.  
To set limits on video capture time, click “Capture” and select “Set Time Limit”.  
Note: You can limit the size of the video capture size by clicking “File” and choosing “Allocate File Space”. Enter the amount of disk  
space to be used in the capture size field. Any video (data) that exceeds the allocated size will be lost.  
6
 
Using Arcsoft PhotoImpression  
Click the Icon  
on your desktop or click Start Æ Arcsoft PhotoImpression. Note: The Get Photo control panel will be  
displayed on your screen.  
Choose the Camera/ Scanner Icon  
Using the “View Mode” located in the upper right-hand corner of the applications window, you can view your photos  
accordingly. Single Photo, Large Thumbnails, Small Thumbnails, Detail mode, or Full Screen.  
and select your device  
to begin downloading your photos.  
To sort your photos by Name. Type, Size or Date, click “Sort” button.  
To Locate a photo by using it’s name or description use “Find” button.  
To create a slide show, simply click t the “Slide Show” Icon and choose your presentation settings. Click “Save” and  
choose a destination to save the file. Click “OK” to finish.  
To write save your Slide Show to CD/DVD, click the “write “CD/DVD” button.  
To learn how to enhance, create effects, print and send your photos refer to the “Help” section located in the top tool bar  
or press the F1 function key on your keyboard while the program is running.  
7
 
Capturing Images from “Live” Video  
Click the Icon  
on your desktop or click Start Æ ProgramsÆ Arcsoft PhotoImpression .  
From the “Get Photo” control Panel, choose the Video Icon  
will appear with the following options:  
for “live” video capture. The “Live” Video capture control panel  
Source: allows you to modify the Video Camera capture properties and settings such as Brightness, Hue, Saturation,  
White Balance, Exposure and Light Frequency.  
Live: initializes the video camera option and starts the “live” video capture.  
Capture: takes still snapshots from your “live” video capture.  
Done: will close the capture image options box.  
8
 
Using Arcsoft VideoImpression  
Click this Icon  
on your desktop or click Start Æ ProgramsÆ Arcsoft Videoimpression. Once the applications is opened,  
The “getting Started Wizard” will appear. The following options will be available for you to choose from:  
Open an existing Project – Lets you browse your system for existing project  
files. These files are not complete movies or slide shows; they are “work-in-  
progress” files that let you fully edit the components of the storyboard.  
Create a New Video – Creates a new, blank video project and lets you capture  
content from connected devices or select files on your system or you can go  
directly to your albums to select content for your movie.  
Create a New Slide Show – Creates a new blank slide show project and lets  
you capture content from connected devices or select files on your system,  
you can also go directly to your albums to select content for your movie  
To learn more on how to use Video Impression refer to the “Help” section  
located in the top tool bar or press the F1 function key on your keyboard  
while the program is running.  
9
 
Troubleshooting  
Problem  
Resolution  
“No capture device found” error  
Make sure you have connected the webcam correctly into the USB port or try a  
different USB port on your PC.  
There may be a conflict with previous camera/scanner software installed on your  
PC. You may need to remove the previous software before using this device. Try  
removing the previous driver and reinstalling the software.  
“Camera not connected” error  
Webcam image is blurry  
For a sharper image, adjust the focus by rotating the focus ring located on the  
front of your webcam.  
Webcam image is too dark  
(Black or green screen)  
There may be a conflict with previous camera/scanner software installed on your  
PC. You may need to remove the previous software before using this device. Try  
removing the previous driver and reinstalling the software.  
Make sure there is sufficient light in the room.  
10  
 
Helpful Hints  
The following hints will help you achieve the best results with your webcam:  
Webcam placement  
Position the webcam so that the subject is centered.  
Lighting  
Use sufficient lighting.  
Maintenance  
Keep the webcam away from moisture and extreme temperature.  
Never use harsh or abrasive cleaners or organic solvents on the webcam or on any of its parts.  
Never disassemble or touch the inside of the webcam. Only Micro Innovations may service or repair this device.  
Technical Support hours of operation: Monday - Friday 8:30am to 7:00pm E.S.T.  
11  
 

Kuhn Rikon Mixer 50100 User Manual
Leica Laser Level 764555 User Manual
LG Electronics Cell Phone AX310 User Manual
LG Electronics Network Card GH22LS30 User Manual
Lincoln Electric Welding System IM640 A User Manual
Lindy Switch 25020 User Manual
Magnasonic CD Player MCD306 User Manual
Makita Chainsaw DCS 330 TH User Manual
Market Forge Industries Boiler Gas Operated Boiler User Manual
McIntosh Stereo Amplifier C2300 User Manual